Garagistic - BMW 2 Series F22 F23 Stainless Steel Complete 6 Brake Line Kit - DOT Compliant - 228i 230i M235i M240i
BMW 2 Series F22 F23 Stainless Steel Complete 6 Brake Line Kit - DOT Compliant - 228i 230i M235i M240i
Overview
These F22/F23 stainless steel brake lines are a must for any tracked or spiritedly driven F22/F23. These will offer a quicker pedal response while being able to maintain consistent brake pressure. This means an improved brake modulation feel, especially during threshold braking. This is by far the best bang for buck mod for your F22/23 braking system. Rubber lines are cracking by this age in the F22/F23 life and can be dangerous if not replaced. Even when new, the stock rubber expands when you press the brake pedal. They expand under the normal pressure of use. This expansion of the brake line negatively affects the brake caliper piston travel and makes for mushy pedal feedback. Stainless steel brake lines improve braking performance. Made in the USA and DOT compliant. These lines replace part numbers 34306792254 & 34306792253.
Brake Fluid: We recommend ATE Original TYP 200 DOT4 for its dry boiling point of at least 536°F and wet boiling point of at least 374°F.
Benefits of Stainless Steel Brake Lines
The inner Teflon line is covered with a woven stainless steel braid that will not expand under pressure. The advantages include better brake pedal feedback and a firmer pedal, along with superior brake modulation. The results will be immediate! Not to mention they are fully compliant with DOT Standards (MVSS-1006), have a lifetime warranty, and are burst-tested to 6000psi (the maximum tested pressure from a BMW braking system is 1200psi).
Unlike other brands out there, our brake lines have Teflon inner line covered with a woven layer of stainless steel and covered in an abrasion-resistant material (plastic covering). We even have plastic end pieces so there are no exposed steel fibers. Be sure to have a qualified installer to make sure they are responsible for correct fitting and bleeding procedure as recommended by BMW. As brake line installation is a safety-related item, the installer assumes all responsibilities and risks associated with brake line replacement.
WILL THESE STAINLESS STEEL BRAKE LINES FIT MY BMW F22/F23?
- Fits all F22 & F23 models
- Compatible with BMW 228i, 230i, M235i, M240i
These lines replace part numbers 34306792254 & 34306792253. If you are unsure of your F22/F23's compatibility, please check your VIN on realoem.com or contact us!
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Garagistic - BMW 2 Series F22 F23 Stainless Steel Complete 6 Brake Line Kit - DOT Compliant - 228i 230i M235i M240i
Garagistic - BMW 2 Series F22 F23 Stainless Steel Complete 6 Brake Line Kit - DOT Compliant - 228i 230i M235i M240i
BMW 2 Series F22 F23 Stainless Steel Complete 6 Brake Line Kit - DOT Compliant - 228i 230i M235i M240i
Overview
These F22/F23 stainless steel brake lines are a must for any tracked or spiritedly driven F22/F23. These will offer a quicker pedal response while being able to maintain consistent brake pressure. This means an improved brake modulation feel, especially during threshold braking. This is by far the best bang for buck mod for your F22/23 braking system. Rubber lines are cracking by this age in the F22/F23 life and can be dangerous if not replaced. Even when new, the stock rubber expands when you press the brake pedal. They expand under the normal pressure of use. This expansion of the brake line negatively affects the brake caliper piston travel and makes for mushy pedal feedback. Stainless steel brake lines improve braking performance. Made in the USA and DOT compliant. These lines replace part numbers 34306792254 & 34306792253.
Brake Fluid: We recommend ATE Original TYP 200 DOT4 for its dry boiling point of at least 536°F and wet boiling point of at least 374°F.
Benefits of Stainless Steel Brake Lines
The inner Teflon line is covered with a woven stainless steel braid that will not expand under pressure. The advantages include better brake pedal feedback and a firmer pedal, along with superior brake modulation. The results will be immediate! Not to mention they are fully compliant with DOT Standards (MVSS-1006), have a lifetime warranty, and are burst-tested to 6000psi (the maximum tested pressure from a BMW braking system is 1200psi).
Unlike other brands out there, our brake lines have Teflon inner line covered with a woven layer of stainless steel and covered in an abrasion-resistant material (plastic covering). We even have plastic end pieces so there are no exposed steel fibers. Be sure to have a qualified installer to make sure they are responsible for correct fitting and bleeding procedure as recommended by BMW. As brake line installation is a safety-related item, the installer assumes all responsibilities and risks associated with brake line replacement.
WILL THESE STAINLESS STEEL BRAKE LINES FIT MY BMW F22/F23?
- Fits all F22 & F23 models
- Compatible with BMW 228i, 230i, M235i, M240i
These lines replace part numbers 34306792254 & 34306792253. If you are unsure of your F22/F23's compatibility, please check your VIN on realoem.com or contact us!
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
BMW 2 Series F22 F23 Stainless Steel Complete 6 Brake Line Kit - DOT Compliant - 228i 230i M235i M240i
Overview
These F22/F23 stainless steel brake lines are a must for any tracked or spiritedly driven F22/F23. These will offer a quicker pedal response while being able to maintain consistent brake pressure. This means an improved brake modulation feel, especially during threshold braking. This is by far the best bang for buck mod for your F22/23 braking system. Rubber lines are cracking by this age in the F22/F23 life and can be dangerous if not replaced. Even when new, the stock rubber expands when you press the brake pedal. They expand under the normal pressure of use. This expansion of the brake line negatively affects the brake caliper piston travel and makes for mushy pedal feedback. Stainless steel brake lines improve braking performance. Made in the USA and DOT compliant. These lines replace part numbers 34306792254 & 34306792253.
Brake Fluid: We recommend ATE Original TYP 200 DOT4 for its dry boiling point of at least 536°F and wet boiling point of at least 374°F.
Benefits of Stainless Steel Brake Lines
The inner Teflon line is covered with a woven stainless steel braid that will not expand under pressure. The advantages include better brake pedal feedback and a firmer pedal, along with superior brake modulation. The results will be immediate! Not to mention they are fully compliant with DOT Standards (MVSS-1006), have a lifetime warranty, and are burst-tested to 6000psi (the maximum tested pressure from a BMW braking system is 1200psi).
Unlike other brands out there, our brake lines have Teflon inner line covered with a woven layer of stainless steel and covered in an abrasion-resistant material (plastic covering). We even have plastic end pieces so there are no exposed steel fibers. Be sure to have a qualified installer to make sure they are responsible for correct fitting and bleeding procedure as recommended by BMW. As brake line installation is a safety-related item, the installer assumes all responsibilities and risks associated with brake line replacement.
WILL THESE STAINLESS STEEL BRAKE LINES FIT MY BMW F22/F23?
- Fits all F22 & F23 models
- Compatible with BMW 228i, 230i, M235i, M240i
These lines replace part numbers 34306792254 & 34306792253. If you are unsure of your F22/F23's compatibility, please check your VIN on realoem.com or contact us!
