Garagistic - E36/E46 Racing Seat Floor Mount Adapters
E36/E46Ā Racing Seat Floor Mount Adapters
Overview
If you are looking for a solution to mount your aftermarket racing seat into your E36 or E46 chassis, look no further! The Garagistic racing seat floor mount brackets have features that the competition simply doesn't offer, and the most adjustment available on the market today! Not only does this allow you to change and tailor your driving position, but it also gives you the ability to get your racing seat closer to the transmission tunnel for a better fit and better weight distribution. Compatible with most side-mount seats like Momo, Sparco, Cobra, Racetech, Kirkey, Recaro, Status, Sabelt, and Bride.
Compatible with most side-mount seats like Momo, Sparco, Cobra, Racetech, Kirkey, Recaro, Status, Sabelt, and Bride. Check out our Side mount brackets compatible with most racing seats.
Important: Each kit purchased includes one set of adapters, which is enough to install one seat. In order to do both driver and passenger seats, you will need to order 2 sets of floor mounts.Ā
Install Note: We recommend always using a little blue Loctite to make sure the bolts don't get loose!Ā
Fitment
- Fits ALL E36 models: 318, 325, 328, M3
-
Fits ALL E46 models: 325, 328, 330, M3
Features
- Material: Made of 6061 aluminum
- Finish: Available in both bare aluminum and anodized black options
- Design: More adjustment than any bracket on the market
- Dual Mounting Points:Ā Two settings built into every bracket (Under 6' and over 6')
- Seat Position: Allows you to center your body to the steering wheel (better fit and better weight distribution)
- Fits Fixed Back Racing Seats: Momo, Sparco, Cobra, Racetech, Kirkey, Recaro, Status, Sabelt, and Bride.Ā
- Seat Position: Allows you to center your body to the steering wheel (better fit and better weight distribution)
- Fitment: Allows seats to be installed lower (giving clearance for helmets, cages, etc.)
- Hardware: Threaded for m8x1.25 FIA spec bolts
- Install: Makes mounting your racing seat 100% bolt-up
- Sliders: Can be used with some sliders (does not work with Recaro Inside Bars No Tabs Sliders)
Included
- Floor Mounts: Enough for 1 seat
-
Mounting Hardware: QTY:4 - M8X1.25 Hex Head Bolts
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Garagistic - E36/E46 Racing Seat Floor Mount Adapters
Garagistic - E36/E46 Racing Seat Floor Mount Adapters
E36/E46Ā Racing Seat Floor Mount Adapters
Overview
If you are looking for a solution to mount your aftermarket racing seat into your E36 or E46 chassis, look no further! The Garagistic racing seat floor mount brackets have features that the competition simply doesn't offer, and the most adjustment available on the market today! Not only does this allow you to change and tailor your driving position, but it also gives you the ability to get your racing seat closer to the transmission tunnel for a better fit and better weight distribution. Compatible with most side-mount seats like Momo, Sparco, Cobra, Racetech, Kirkey, Recaro, Status, Sabelt, and Bride.
Compatible with most side-mount seats like Momo, Sparco, Cobra, Racetech, Kirkey, Recaro, Status, Sabelt, and Bride. Check out our Side mount brackets compatible with most racing seats.
Important: Each kit purchased includes one set of adapters, which is enough to install one seat. In order to do both driver and passenger seats, you will need to order 2 sets of floor mounts.Ā
Install Note: We recommend always using a little blue Loctite to make sure the bolts don't get loose!Ā
Fitment
- Fits ALL E36 models: 318, 325, 328, M3
-
Fits ALL E46 models: 325, 328, 330, M3
Features
- Material: Made of 6061 aluminum
- Finish: Available in both bare aluminum and anodized black options
- Design: More adjustment than any bracket on the market
- Dual Mounting Points:Ā Two settings built into every bracket (Under 6' and over 6')
- Seat Position: Allows you to center your body to the steering wheel (better fit and better weight distribution)
- Fits Fixed Back Racing Seats: Momo, Sparco, Cobra, Racetech, Kirkey, Recaro, Status, Sabelt, and Bride.Ā
- Seat Position: Allows you to center your body to the steering wheel (better fit and better weight distribution)
- Fitment: Allows seats to be installed lower (giving clearance for helmets, cages, etc.)
- Hardware: Threaded for m8x1.25 FIA spec bolts
- Install: Makes mounting your racing seat 100% bolt-up
- Sliders: Can be used with some sliders (does not work with Recaro Inside Bars No Tabs Sliders)
Included
- Floor Mounts: Enough for 1 seat
-
Mounting Hardware: QTY:4 - M8X1.25 Hex Head Bolts
Original: $199.50
-65%$199.50
$69.82Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
E36/E46Ā Racing Seat Floor Mount Adapters
Overview
If you are looking for a solution to mount your aftermarket racing seat into your E36 or E46 chassis, look no further! The Garagistic racing seat floor mount brackets have features that the competition simply doesn't offer, and the most adjustment available on the market today! Not only does this allow you to change and tailor your driving position, but it also gives you the ability to get your racing seat closer to the transmission tunnel for a better fit and better weight distribution. Compatible with most side-mount seats like Momo, Sparco, Cobra, Racetech, Kirkey, Recaro, Status, Sabelt, and Bride.
Compatible with most side-mount seats like Momo, Sparco, Cobra, Racetech, Kirkey, Recaro, Status, Sabelt, and Bride. Check out our Side mount brackets compatible with most racing seats.
Important: Each kit purchased includes one set of adapters, which is enough to install one seat. In order to do both driver and passenger seats, you will need to order 2 sets of floor mounts.Ā
Install Note: We recommend always using a little blue Loctite to make sure the bolts don't get loose!Ā
Fitment
- Fits ALL E36 models: 318, 325, 328, M3
-
Fits ALL E46 models: 325, 328, 330, M3
Features
- Material: Made of 6061 aluminum
- Finish: Available in both bare aluminum and anodized black options
- Design: More adjustment than any bracket on the market
- Dual Mounting Points:Ā Two settings built into every bracket (Under 6' and over 6')
- Seat Position: Allows you to center your body to the steering wheel (better fit and better weight distribution)
- Fits Fixed Back Racing Seats: Momo, Sparco, Cobra, Racetech, Kirkey, Recaro, Status, Sabelt, and Bride.Ā
- Seat Position: Allows you to center your body to the steering wheel (better fit and better weight distribution)
- Fitment: Allows seats to be installed lower (giving clearance for helmets, cages, etc.)
- Hardware: Threaded for m8x1.25 FIA spec bolts
- Install: Makes mounting your racing seat 100% bolt-up
- Sliders: Can be used with some sliders (does not work with Recaro Inside Bars No Tabs Sliders)
Included
- Floor Mounts: Enough for 1 seat
-
Mounting Hardware: QTY:4 - M8X1.25 Hex Head Bolts
