Garagistic - E82/E90/E92 Racing Seat Floor Mount Adapters
E82/E90/E92Ā Garagistic Racing Seat Floor Mount Adapters
Overview
If you seek a solution for installing your aftermarket racing seat in your BMW, search no more! The Garagistic racing seat floor mount brackets enable precise adjustment of your seating position. This not only affords you the flexibility to customize your driving posture but also grants the capability to bring your racing seat closer to the transmission tunnel, enhancing fit and optimizing weight distribution. These brackets are compatible with a wide range of side-mount seats, including but not limited to Momo, Sparco, Cobra, Racetech, Kirkey, Recaro, Status, Sabelt, and Bride. Check out our Side mount brackets compatible with most racing seats AVAILABLE HERE!
We recommend always using a little blue Loctite to make sure the bolts don't get loose!Ā
Note: THIS IS FOR ONE SET OF ADAPTERS TO COVER ONE SEAT. IN ORDER TOĀ DO BOTH DRIVER AND PASSENGER SEATS YOU WOULD NEED TO ORDER 2 OF THIS LISTING.
FITMENT
- All years and models E8X: 128i, 135i, 1M
- Please Note: Convertibles may require modifications to fit.
- All years and modelsĀ E9X: 328i, 335i, M3
- Please Note: Convertibles may require modifications to fit.
Note: Please select your correct chassis in the drop-down menu
FEATURES
- Design: Fits side-mounted racing seats: Momo, Sparco, Cobra, Racetech, Kirkey, Recaro, Status, Sabelt, and Bride
- Design: Allows you to center your body to the steering wheel (better fit and better weight distribution)
- Design: More adjustment than any bracket on the market
- Material: Made from 6061 billet aluminum
- Hardware: Threaded for m8x1.25 FIA spec bolts
- Ease of Use: Makes mounting your racing seat 100% bolt up
- Color: Available in an anodized option
- Design: Allows low installation of seats (giving clearance for helmets, cages, etc)
- Fitment: Can be used with some sliders (does not work with Recaro Inside Bars No Tabs Sliders)
- Design: Two settings are built into every bracket (Under 6' and over 6')
INCLUDED
- Hardware: QTY:4 - M8X1.25 Hex Head Bolts
- Mounts: Enough forĀ 1 seat
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Garagistic - E82/E90/E92 Racing Seat Floor Mount Adapters
Garagistic - E82/E90/E92 Racing Seat Floor Mount Adapters
E82/E90/E92Ā Garagistic Racing Seat Floor Mount Adapters
Overview
If you seek a solution for installing your aftermarket racing seat in your BMW, search no more! The Garagistic racing seat floor mount brackets enable precise adjustment of your seating position. This not only affords you the flexibility to customize your driving posture but also grants the capability to bring your racing seat closer to the transmission tunnel, enhancing fit and optimizing weight distribution. These brackets are compatible with a wide range of side-mount seats, including but not limited to Momo, Sparco, Cobra, Racetech, Kirkey, Recaro, Status, Sabelt, and Bride. Check out our Side mount brackets compatible with most racing seats AVAILABLE HERE!
We recommend always using a little blue Loctite to make sure the bolts don't get loose!Ā
Note: THIS IS FOR ONE SET OF ADAPTERS TO COVER ONE SEAT. IN ORDER TOĀ DO BOTH DRIVER AND PASSENGER SEATS YOU WOULD NEED TO ORDER 2 OF THIS LISTING.
FITMENT
- All years and models E8X: 128i, 135i, 1M
- Please Note: Convertibles may require modifications to fit.
- All years and modelsĀ E9X: 328i, 335i, M3
- Please Note: Convertibles may require modifications to fit.
Note: Please select your correct chassis in the drop-down menu
FEATURES
- Design: Fits side-mounted racing seats: Momo, Sparco, Cobra, Racetech, Kirkey, Recaro, Status, Sabelt, and Bride
- Design: Allows you to center your body to the steering wheel (better fit and better weight distribution)
- Design: More adjustment than any bracket on the market
- Material: Made from 6061 billet aluminum
- Hardware: Threaded for m8x1.25 FIA spec bolts
- Ease of Use: Makes mounting your racing seat 100% bolt up
- Color: Available in an anodized option
- Design: Allows low installation of seats (giving clearance for helmets, cages, etc)
- Fitment: Can be used with some sliders (does not work with Recaro Inside Bars No Tabs Sliders)
- Design: Two settings are built into every bracket (Under 6' and over 6')
INCLUDED
- Hardware: QTY:4 - M8X1.25 Hex Head Bolts
- Mounts: Enough forĀ 1 seat
Original: $199.50
-65%$199.50
$69.82Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
E82/E90/E92Ā Garagistic Racing Seat Floor Mount Adapters
Overview
If you seek a solution for installing your aftermarket racing seat in your BMW, search no more! The Garagistic racing seat floor mount brackets enable precise adjustment of your seating position. This not only affords you the flexibility to customize your driving posture but also grants the capability to bring your racing seat closer to the transmission tunnel, enhancing fit and optimizing weight distribution. These brackets are compatible with a wide range of side-mount seats, including but not limited to Momo, Sparco, Cobra, Racetech, Kirkey, Recaro, Status, Sabelt, and Bride. Check out our Side mount brackets compatible with most racing seats AVAILABLE HERE!
We recommend always using a little blue Loctite to make sure the bolts don't get loose!Ā
Note: THIS IS FOR ONE SET OF ADAPTERS TO COVER ONE SEAT. IN ORDER TOĀ DO BOTH DRIVER AND PASSENGER SEATS YOU WOULD NEED TO ORDER 2 OF THIS LISTING.
FITMENT
- All years and models E8X: 128i, 135i, 1M
- Please Note: Convertibles may require modifications to fit.
- All years and modelsĀ E9X: 328i, 335i, M3
- Please Note: Convertibles may require modifications to fit.
Note: Please select your correct chassis in the drop-down menu
FEATURES
- Design: Fits side-mounted racing seats: Momo, Sparco, Cobra, Racetech, Kirkey, Recaro, Status, Sabelt, and Bride
- Design: Allows you to center your body to the steering wheel (better fit and better weight distribution)
- Design: More adjustment than any bracket on the market
- Material: Made from 6061 billet aluminum
- Hardware: Threaded for m8x1.25 FIA spec bolts
- Ease of Use: Makes mounting your racing seat 100% bolt up
- Color: Available in an anodized option
- Design: Allows low installation of seats (giving clearance for helmets, cages, etc)
- Fitment: Can be used with some sliders (does not work with Recaro Inside Bars No Tabs Sliders)
- Design: Two settings are built into every bracket (Under 6' and over 6')
INCLUDED
- Hardware: QTY:4 - M8X1.25 Hex Head Bolts
- Mounts: Enough forĀ 1 seat
