Garagistic - E82/E92 Dual Oval Shifter Kit (E88 128i 135i, E9X 323i 325i 328i 330i 335i N52 N55)
E8X/E9X Dual Oval Shifter Kit (E88 128i 135i, E9X 323i 325i 328i 330i 335i N52 N55
Overview
This is our complete E8X/E9X dual oval shifter bushing rebuild kit designed specifically for manual transmission 1 Series and 3 Series chassis' with a 6-speed transmission. This bushing kit pairs great with our Supreme Shifter found here.
This kit replaces all of the key maintenance items in the factory shifter assembly needed to make it feel fresh again. Our Garagistic Delrin or Aluminum front carrier bushings replace the original rubber bushings (which not only had a lot of "give" but are usually neglected and degrade over time). The rear poly bushing will replace the very soft OEM which is a culprit for a mushy shifter feel and is retrofitted into the thin factory metal housing for reinstallation. When replaced together, these bushings eliminate any side-to-side movement of the aluminum shift carrier. These shifter bushings fit at the front and rear of the aluminum carrier and will not increase vibration or harshness while still improving the shifter's feel. For best results, we recommend replacing the factory selector joint found on the end of the transmission (25117580281) with our Late Model Selector Joint.
It's a really good idea to change your transmission fluid while you are down there. We recommend this fluid: https://amzn.to/41KYOnn . One of these is also helpful when you're doing it: https://amzn.to/3N3piN2
Included
Each kit consists of:
- Garagistic E8X/E9X Polyurethane Rear Carrier Bushing (fits inside 25111222015)
- Garagistic Oval Shifter Bushings x 2 - available in Delrin or Aluminum (25117507695)
- OEM Shifter Cup (25111220600)
Fitment
What BMW models does this kit fit?
- E8X's
- E9X Sedans and Coupes
If you are unsure, please check your VIN on realoem.com, check the manufacture date of your car on the sticker in the driver-side door jam, or email [email protected]
Note on Front Carrier Shifter Bushing Fitment:
One front carrier bushing might fit differently than the other side. Click here to learn why.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Garagistic - E82/E92 Dual Oval Shifter Kit (E88 128i 135i, E9X 323i 325i 328i 330i 335i N52 N55)
Garagistic - E82/E92 Dual Oval Shifter Kit (E88 128i 135i, E9X 323i 325i 328i 330i 335i N52 N55)
E8X/E9X Dual Oval Shifter Kit (E88 128i 135i, E9X 323i 325i 328i 330i 335i N52 N55
Overview
This is our complete E8X/E9X dual oval shifter bushing rebuild kit designed specifically for manual transmission 1 Series and 3 Series chassis' with a 6-speed transmission. This bushing kit pairs great with our Supreme Shifter found here.
This kit replaces all of the key maintenance items in the factory shifter assembly needed to make it feel fresh again. Our Garagistic Delrin or Aluminum front carrier bushings replace the original rubber bushings (which not only had a lot of "give" but are usually neglected and degrade over time). The rear poly bushing will replace the very soft OEM which is a culprit for a mushy shifter feel and is retrofitted into the thin factory metal housing for reinstallation. When replaced together, these bushings eliminate any side-to-side movement of the aluminum shift carrier. These shifter bushings fit at the front and rear of the aluminum carrier and will not increase vibration or harshness while still improving the shifter's feel. For best results, we recommend replacing the factory selector joint found on the end of the transmission (25117580281) with our Late Model Selector Joint.
It's a really good idea to change your transmission fluid while you are down there. We recommend this fluid: https://amzn.to/41KYOnn . One of these is also helpful when you're doing it: https://amzn.to/3N3piN2
Included
Each kit consists of:
- Garagistic E8X/E9X Polyurethane Rear Carrier Bushing (fits inside 25111222015)
- Garagistic Oval Shifter Bushings x 2 - available in Delrin or Aluminum (25117507695)
- OEM Shifter Cup (25111220600)
Fitment
What BMW models does this kit fit?
- E8X's
- E9X Sedans and Coupes
If you are unsure, please check your VIN on realoem.com, check the manufacture date of your car on the sticker in the driver-side door jam, or email [email protected]
Note on Front Carrier Shifter Bushing Fitment:
One front carrier bushing might fit differently than the other side. Click here to learn why.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
E8X/E9X Dual Oval Shifter Kit (E88 128i 135i, E9X 323i 325i 328i 330i 335i N52 N55
Overview
This is our complete E8X/E9X dual oval shifter bushing rebuild kit designed specifically for manual transmission 1 Series and 3 Series chassis' with a 6-speed transmission. This bushing kit pairs great with our Supreme Shifter found here.
This kit replaces all of the key maintenance items in the factory shifter assembly needed to make it feel fresh again. Our Garagistic Delrin or Aluminum front carrier bushings replace the original rubber bushings (which not only had a lot of "give" but are usually neglected and degrade over time). The rear poly bushing will replace the very soft OEM which is a culprit for a mushy shifter feel and is retrofitted into the thin factory metal housing for reinstallation. When replaced together, these bushings eliminate any side-to-side movement of the aluminum shift carrier. These shifter bushings fit at the front and rear of the aluminum carrier and will not increase vibration or harshness while still improving the shifter's feel. For best results, we recommend replacing the factory selector joint found on the end of the transmission (25117580281) with our Late Model Selector Joint.
It's a really good idea to change your transmission fluid while you are down there. We recommend this fluid: https://amzn.to/41KYOnn . One of these is also helpful when you're doing it: https://amzn.to/3N3piN2
Included
Each kit consists of:
- Garagistic E8X/E9X Polyurethane Rear Carrier Bushing (fits inside 25111222015)
- Garagistic Oval Shifter Bushings x 2 - available in Delrin or Aluminum (25117507695)
- OEM Shifter Cup (25111220600)
Fitment
What BMW models does this kit fit?
- E8X's
- E9X Sedans and Coupes
If you are unsure, please check your VIN on realoem.com, check the manufacture date of your car on the sticker in the driver-side door jam, or email [email protected]
Note on Front Carrier Shifter Bushing Fitment:
One front carrier bushing might fit differently than the other side. Click here to learn why.
